This a comprehensive kit that will allow you to have everything you need to replace both front hub bearings and all ball joints both the upper and lower all in one package shipped to your door.  When ordering this kit we will need to know the last 8 of your VIN so we can determine the application of the hub bearing.  Please be aware that if you have an Early build 1999 model to use these Hub Bearings it will require you to change the rotors to the later style. We can either provide you the rotors or to save on shipping we can give several different aftermarket part numbers that can obtain locally. You will recieve the following:

Moog Brand Greaseable Ball Joints

2-K80026 upper greasable ball joints

2-K8607T lower.greasable ball joints

2-F81Z4A322AA Yellow Orings between the hub and knuckle

2-F81Z3254CB Hub seals

2-F81Z1S175HCA Axle seals

8-F81Z1107AA Studs to connect hub bearing to knuckle

8-F81Z1120AA Nuts for above studs

2-Hub Beaing Assy 

These include all wheel studs and ABS sensors if applicable.  Part Number varies dependent on application.  Please provide the last 8 Digits of you Vehicle Identification Numer (VIN) so we can determine the correct ones for your truck.

 As you can see this is everything in one box and ready to go so you don't have to make the extra trips after a seal or stud half way into the repair.  All parts meet or exceed OEM standards at a fraction of the cost.

When you purchase a hub bearing from PowerStrokeShop.com

we give you everything you need to get the job done in one convenient package!

Our Hub Bearing assemblies come with the following:

1-Ford Hub Seal Part-no. F81Z3254CB

4-Studs to connect the hub bearing to the knuckle F81Z1107AA

4-Nuts for the above studs F81Z1120AA

1-Ford Yellow Hub to Knuckle O-ring F81Z4A322AA

1-Front Axle Sealed Bearing and Hub Assembly fits 4x4 F250-350 built after 3/22/99 with SRW 4 Wheel ABS.  Also fits 00-05 Excursions. 

When you purchase a hub bearing from PowerStrokeShop.com

we give you everything you need to get the job done in one convenient package!

Our Hub Bearing assemblies come with the following:

1-Ford Hub Seal Part-no. F81Z3254CB

4-Studs to connect the hub bearing to the knuckle F81Z1107AA

4-Nuts for the above studs F81Z1120AA

1-Ford Yellow Hub to Knuckle O-ring F81Z4A322AA

1-Front Axle Sealed Bearing and Hub Assembly fits 4x4 F250-350 built after 3/22/99 with DRW 4 Wheel ABS.

When you purchase a hub bearing from PowerStrokeShop.com

we give you everything you need to get the job done in one convenient package!

Our Hub Bearing assemblies come with the following:

1-Ford Hub Seal Part-no. F81Z3254CB

4-Studs to connect the hub bearing to the knuckle F81Z1107AA

4-Nuts for the above studs F81Z1120AA

1-Ford Yellow Hub to Knuckle O-ring F81Z4A322AA

1-Front Axle Sealed Bearing and Hub Assembly fits 4x4 F250-350 built after 3/22/99 with SRW Rear Wheel ABS only.

4WD BALL JOINT KIT

Complete set of upper and lower ball joints w/ seals and o-rings 99-04 F-SERIES 4x4

Kit contains:

2-K80026 upper greasable ball joints Moog Brand

2-K8607T lower greasable ball joints Moog Brand

2-F81Z 4A322AA Yellow O-rings between the hub and knuckle

2-F81Z 3254CB Hub seals

2-F81Z 1S175HCA Axle seals

Moog brand is superior to the OEM Ford balljoints due to the fact that they come with a grease zerk. This is enables you to grease them and prolong the life versus the OEM ones which are a sealed unit and do not allow you to grease them.

Click here for a detailed writeup on Ball Joint replacement